Bulletproof foam? Not yet, but this is about as close as you will get. When Boost liquid fortifier is mixed with our Foam Coat it makes it incredibly strong and weatherproof, plus makes it stick to almost anything!
MIXING: Mix with 50% water for max strength. Thin more where less strenth is needed. Always add the Foam Coat to the liquid. Start with 1 part liquid to 3 parts Foam Coat, and thin or thicken as desired. Thinning the Foam Coat with more Boost will not weaken it.
APPLYING: Fill large cracks and holes with pasty mixture. To coat large areas add more liquid until thin enought to apply with a paint brush. May be applied as thick as 3/8 inch, but multiple coats are stronger. Try texturing surface before coating sets. SET TIME: Use within 10 minutes. Sets hard in 30 minutes. Maximum bond and hardness in 1 day.
CLEAN-UP: Immediately clean tools and brushes with soapy water. Can not be removed once dry. FINISHING: May be painted or stained. Suggested Dilutions Boost/Water : Super Strong: 1:1 Very Strong: 1:2 Strong: 1:3
Click here to learn more about the different foam coat systems.
Click here for mixing and safety tips.
International customers (outside the US) We do not allow automatic international ordering on our site (of hot wire foam products only) because we like to give you personal attention to make sure that you get everything you need. Contact Marc at Marc@animateclay.com. We will also help you choose the best international shipping option. We will give you some extra goodies, like replacement wires, to help make up for the extra cost for shipping overseas. Some Kits will ship to many countries for as low as $24.
This product was added to our catalog on Tuesday 13 July, 2010.