# 025BO-8 Bounce (8oz.)

  • Shipping Weight: 0.08lbs
  • 529 Units in Stock


Add to Cart:
Incredible Bouncing Foam Boulders? This new liquid rubberizer makes our Foam Coat: Flexible Highly resistant to cracking on impact. Weather proof. Go on thinner. Stick even better to most porous materials.

Mixing: Use Bounce with no added water for max flexibility. The Foam Coat comes out more flexible when no or less water is added to the Bounce. Start with 1 part liquid to 1 part Foam Coat, and thin or thicken as desired. Thinning the Foam Coat with more Bounce will not weaken it, and will allow very strong thin layers to be applied, so you don't lose details. Try a mixture of 9 parts Bounce to one part Foam Coat for a super rubbery coating. Thin layers can be applied to verticle and inverted surfaces with little or no sagging.

Apply straight, or with just a little bit of Foam Coat as a strong flexible paintable sealant. Dilute the Bounce with water before mixing with Foam Coat to get a less flexible super smooth chip resistant surface. Applying: Fill holes with pasty mixture. To coat large areas add more liquid until thin enough to apply with a paint brush. May be applied as thick as 3/8 inch, but multiple coats are stronger.

Looks like smooth stone when dry. Try texturing the surface before coating sets. Is compatible with our Grit Texturizers. Set Time: Use within 15 mins. Sets up in 30 mins. Maximum bond and strength in 1 day. Clean-Up: Immediately clean tools and brushes with soapy water. Finishing: Paint or stain as desired.

Click here to learn more about the different foam coat systems.

Click here for mixing and safety tips.

International customers (outside the US) We do not allow automatic international ordering on our site (of hot wire foam products only) because we like to give you personal attention to make sure that you get everything you need. Contact Marc at Marc@animateclay.com. We will also help you choose the best international shipping option. We will give you some extra goodies, like replacement wires, to help make up for the extra cost for shipping overseas. Some Kits will ship to many countries for as low as $24.

This product was added to our catalog on Wednesday 14 July, 2010.

Important Links

Copyright © 2024 The Clay and Stop Motion Animation Store. Powered by Zen Cart